Home > News > Industry News

How to safely operate Hydraulic Table Lifter

2022-07-18

Now the society is developing rapidly, the construction industry is booming, and more and more high-altitude operations are bothering us. In the past, the construction of high-rise buildings was based on scaffolding, and there is no safety guarantee. But now, with the development of industry closely following the times, high-altitude lifting platforms, which are specially used for high-altitude operations, have been derived to help us finish our operations. So how to operate the Hydraulic Table Lifter correctly to ensure the safety of personnel? 

1. During operation, strictly abide by the instructions on the operation safety and maintenance of the equipment, and learn to understand the safety problems of the use of high-altitude lifting platforms;

2. It is forbidden for non professional repairmen to repair without permission. When installing, installing, repairing, and disassembling the lifting platform pump station and other components, the internal pressure value must be zero, and no goods are allowed on the equipment;

 3. When overhauling the hydraulic pump station of the equipment, cut off the power supply of the motor and all other electrical equipment in advance, and the connection and change of all power supplies should be operated by professional technicians;

 4. When we repair or disassemble the hydraulic pump station driven by the right or wrong motor, we cut off all the power supply in advance to ensure that the hydraulic station is always in a state of power failure; 

5. The hydraulic oil in the small hydraulic high-altitude lifting platform is likely to have adverse effects on human health. Prevent direct contact with skin and eyes to prevent personal safety from being endangered; 

6. It is forbidden to disassemble various valves, joints, accessories and other components on the hydraulic lifting platform pump station without authorization. The loosening of any component may cause the load to fall and the equipment to be damaged;

 7. Considering that the replacement of hydraulic oil may pollute the environment, it is necessary to use the recovery container and adopt the corresponding leakage prevention and oil absorption methods; I believe that everyone will have a certain impact on every operation after reading this article. I hope that the personnel of the equipment can operate carefully and truly take precautions.


Hydraulic Table Lifter

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept