How to use a manual stacker

Manual stacker refers to various wheeled handling vehicles for loading and unloading, stacking, stacking and short-distance transportation of palletized goods.
Drive
Before driving the vehicle, check the working condition of the brakes and the pump station, and ensure that the battery is fully charged. Hold the joystick with both hands and force the vehicle to slowly drive towards the working cargo. If you want to stop, use the handbrake or footbrake to stop the vehicle
Discharge
(1) Keep the fork perpendicular to the shelf, approach the shelf carefully and insert it into the bottom of the pallet
(2) Back the stacker to let the forks move out of the pallet
(3) Raise the fork to the required height, slowly move to the pallet to be unloaded, and at the same time ensure that the fork can easily enter the pallet and the goods are in the safe position of the fork
(4) Raise the forks until the pallet is lifted from the rack
(5) Slowly step back in the channel
(6) Slowly lower the cargo and ensure that the fork does not touch the obstacle during the lowering process. Note: During the lifting of the cargo, the steering and braking operations must be slow and careful.
Stacking
(1) Keep the goods low and approach the shelf carefully
(2) Lift the goods to the top of the shelf plane
(3) Slowly move forward, stop when the goods are above the shelf, put down the pallet at this point and pay attention that the forks do not exert force on the shelf under the goods to ensure that the goods are in a safe position
(4) Back slowly and ensure that the pallet is in a free and firm position

(5) Lower the fork to the position where the stacker can travel