What is the installation method of electric hoist slide line?

As a small lifting equipment, electric hoist has the characteristics of small size, light weight, simple operation and convenient use. Therefore, it is widely used in daily lifting operations. However, during use, the slide line of the grinder often breaks down, which brings inconvenience to the maintenance work. Here we will introduce a relatively simple and practical installation method.

Since the electric hoist is usually installed on a U-shaped track, we can use this feature to arrange the steel cable on the upper part of the I-beam in the middle of the track, and the top of the round steel is fixed with flower basket bolts.

The sliding ring also has room for two interlocking rings to avoid scratching. The steering ring is two circular rings connected by bolts and can rotate freely.

Put one end of the steering ring on the steel cable, keep the motor lead, and fix the rubber sleeve wire on the lower end of the steering ring. Thread one end of multiple sliding rings on the steel cable, and then fix the rubber sleeve wire segments on the sliding ring. lower end. The front connection is free to move and the rear connection is connected to the power supply. Under the traction of the electric motor, the steering ring is used as the dot to pull the steel cable to move linearly or circularly.

Of course, the same method can be used on straight tracks.